For 2008, The track department has some big plans.
First
off we will attempt to raise level and tamp yard 11 for the new barn.
The key to getting this work done as quickly as possible is to get the
Jackson 6000 Tamper back and repaired. We can then use the 6000 and the
switch tamper to quickly knock out that work.
Project number 2
is to ballast, and tamp the main line after operations. Progress will
be dependent on our ability to turn the ballast cars.
Project
number 3 is to build tracks in the yard 13/14 yards. Progress on this
will probably be dependent on if we have to swing a track over in yard
11.
Spring Inspections will start in March. The main and car
line will be walked and have all defects identified, and marked. Once
that is done, we will load the motor car and flats, and go fix the
defects. Anyone wanting to learn more about track and structures please
feel free to join us.
Frank DeVries
Comments
Sun, 05-20-2012 17:31
I would like to make a note of a couple of things. The sandblasting process involves taking the sand like material, called blackblast, and smashing it [...]
Fri, 05-18-2012 22:48
This is one interesting freight car. I've been browsing images on-line of these B&O wagon-top cars lately, and noticed a variety of lettering and [...]
Fri, 05-18-2012 12:03
Mark, Its hard to say if 760 will be running in early July. It will be for Diesel Days, but I can't answer yet if we'll have it ready sooner than [...]
Thu, 05-17-2012 13:13
Im going to drive from California to the Chicago area in early July and staying for about 3 weeks. Im a big fan of FM units. Any chance the MILW 760 [...]
Sun, 05-13-2012 11:44
Line sidewalks and steets with rail ties and fill with small pea gravel. Similar to construction near Lincoln Home in Springfield, IL.
Fri, 05-11-2012 10:45
Thank you. If you are send pics to Irm in mail,Please make it attention Roger Kramer. Thanks..
Thu, 05-10-2012 17:08
I will be sending some color photos of the CGW 285 shortly after rebuilding by the CGW. And yes, they had chrome grabs and the end gate. I had been [...]
Thu, 05-10-2012 12:58
Yes there are some chrome plated partsespecially on the sissors gate. Unfortunately, they were recently taken off, and left in the gravel. I have [...]
Thu, 05-10-2012 00:46
The book "Chicago Great Western Color Guide" (Morning Sun) has some interesting notes about these CGW combines: [BEGIN QUOTE] "In 1954 the CGW bought [...]
Sun, 05-06-2012 21:42
Nigel, What you just told me is great news. YOU clarified things for me.
Sun, 05-06-2012 20:34
Wally, I must say that I am puzzled by this comment. The whole driver for the current work is the major FRA mandated inspection (15 year 1472 [...]
Sun, 05-06-2012 16:39
I am just afraid that by the time 1630 is up and ready to run, it will have to be dismantled again to do the Federally mandated inspection. I am [...]