Talk about a flurry of activity over the last week. As you have read
earlier, the pit was freed up last Sunday when CNS&M 714 was run
off the pit on it's own power. So, this past Wednesday, CSL 3142 was
brought over for it's annual inspection. This was done over the last
few days with everything being checked. There is still a desire to look
and try to work out the slight bugs with the breaking system while it's
there on the pit.
Saturday
was also busy with activities. Work on the PCC car that's in barn 4
continued with the last door panel that had to be worked on. They are
looking much better with the rusted parts no longer on them. It does
take a bit of effort to work on these steel cars that were exposed to
all the road grime during the winter.
Windows for the "Baldy" CTA 4146 windows progressed with them getting a start on paint. A new coat always spruces up things.
The
other 4000 series cars might be able to have newly reworked knife
switches. That was some of the work going on, sandblasting, epoxying,
painting. These wearable items need to be serviced, and having some
spares helps with that.
I know it might be noted in the Passenger Dept. Blog, but there was work in the woodshop on the doors for the 7700.
Sunday
was a different matter, mostly because of Easter. Much of the day for
the small crew was spent looking at, and measuring various CSL cars to
see what differences if any there were on the braking systems. CSL 3142
has always had a slower response time, and now that the car is over the
pit, it's a good time to see if anything can be worked on to speed this
time up some. It would be easier if we had a "Chilton's" book on the
car to show us what and more importantly why some of the parts are
doing what they do (comment from random working person "George
(Westinghouse) must have been on something when he came up with this").
We have a few thoughts on what to try, and Bob will talk to the
appropriate people to test these out.
Also, Make sure you read
the comments, there are a few other activities that I forgot to
mention. This is why I like the comments feature, others can add in
things I forget about. I really need to write these things down so I
don't forget them. (Like the number of that PCC car I can never
remember).
Final note: I will be on vacation the next two weekends, so there won't be an update until I get back.
Respectfully Submitted,
Joel Ahrendt
Comments
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]