I see I have been negligent in updating this group. A great many things have happened since February.
Spring
Inspections: Starting in March, Adam, Andy and I have walked all 5
miles of main line, and the carline, looking for track defects. And did
we find defects! We found and repaired no fewer than 8 cracked joint
bars, one complete pull apart aka.. two bolts on one side of a joint
were broken/missing. We also had several broken bolts, and washers. All
speed restrictions were lifted prior to opening day. It took us until
April 5th to get it all done. Add into that we had the Kallas'
popsicles to dump. Chicago rail car called their 5 ballast cars back.
Unfortunately for us, they were still frozen. So with a lot of help
from the Diesel department we thawed and dumped the cars.
We still have some work to do, but will get that done before operations or under traffic.
During
the winter Andy and I spent quite a bit of time trying to get machines
ready for service for this year. Unfortunately when we did a big barn
switch to get machines out, the Tamper decided it had not received
enough attention. She did not want to fire up. With the help of Wes
Lloyd we were able to get her started, but she promptly started to spew
out antifreeze. Looks like out newly rebuilt engine needs some more
work. That will be taken out over the weekend of April 12th and sent
back.
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]