| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Sunday, December 28. 2008ME 28 Update December 28, 2008 Sunday Crew Norm Krentel holds a handful of removed parts form the original rotted baggage doors for the 28, while Ray Schmid wrestles to change the blade setup on our table saw.  Mortising In this view, our 83 year old mortising machine has just plunged several square holes into the bottom rail of the new doors. Ray helped a lot on this, and Norm had to stop by to inspect the work. Sunday, December 28. 2008Milwaukee Electric L 4 Update December 27, 2008 New Artwork Stan Wdowikowski and Buzz Morissette discuss newly acquired artwork for utility mascot 'Ready Kilowatt'. This is part of the herald to be applied to the locomotive cab.  More Paint Krystine Tempinski adds the second coat of green to the new cab door that is being readied for installation. Sunday, December 28. 2008North Shore 757 Update December 27, 2008 Rusty Frame John Baletto braved the not so cold barn area today. He is needlechipping and wire brushing the frames where the cab window was removed for replacement. The metal here turns out to be in VERY POOR condition. |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]