Work continues on the S-105. Over the past several months, new windows frames and doors have been made and most of them installed, with just a few more to be installed once the body is prepped. Work continues on where the frames get installed into the body to make a good tight fit.
The old coupler pocket from one end and all the coupler pocket bolts have been removed and those areas cleaned, primed and painted. The new coupler pockets are slightly larger and have a different hole spacing, so blocks were cut and are being welded into place and new holes will be drilled with the correct spacing to match the pilot.
Some preliminary work has been scoped out to get the rust holes in the roof sealed up. This will continue over the next few months. Additional photos can be viewed in the S-105 Restoration gallery.
The side and end of the cab received a second coat of paint on Thursday night. After some touch up around some hinges and a 3rd coat in these areas, work will move on to the hoods and decks. Additional photos can be found in the L7 gallery.
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]