| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Thursday, August 13. 2009URTX 26640 Update August 12, 2009 Painting The triangluar General American logo has been positioned on the car. This was a very tedious and time consuming job, doing the research, artwork, drawing, and cutting the stencil. Two variations of this logo were to be seen on their cars, each lasting for a fairly short period in history. Later, a more modern GATC target logo was used.  Peeling The moment of truth arrives as the stencil is peeled away to see how well the process worked. Certainly a difficult lettering job on a car with wood siding.  North Side The north side is very nearly completely lettered. Only the text on the plug door itself remains, and research continues on what this car had in that area.  More New Wood Jim Griffith is seen priming more new wood parts fabricated in our woodshop. The needed pieces will complete the south side siding, and replace the rotted roof eave boards. Thursday, August 13. 2009Union Pacific 3786 Update August 12, 2009 CRACK! What a revolting development! A crack was discovered in one of the coupler bodies, meaning it will have to be replaced before we consider this car entering service.  Step Treads Bill Leider was busy painting the step well treads, a very tedious job to say the least. |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]