| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Monday, August 31. 2009URTX 26640 Update August 30, 2009Lettering work continued on the door, which must have been a new development for railroads. They covered it with instructions.  The First Two Groups These are the first two door groups applied earlier this week.  And Next Another stencil is measured and placed for painting.  With the Result And paint applied. Amazing how a few details like this bring the car to life, in this case what was a bland and plain plug door.  B End John Baletto has contributed a lot of work on this restoration project and this weekend he returned to work the needle chipper on the B end. Thanks John! The paint chips are fairly flying off!  Left Side Kirk Warner toiled all day, installing the last two long siding boards and most of the short stubby ones below the door opening. When all the siding has been placed in position, a line will be stretched and all the tails cut off in a straight line. Monday, August 31. 2009ATSF 1400 Update August 29, 2009Buzz Morisette continues to work on this wood caboose, and has supplied several images and the 'back story' for recent work.  Roof Leak  Rotten Floorboards Removed  Repairs to Beams  New Subfloor From Buzz: Late last fall I completed repairs and a fresh coat of paint to the East door and windows. The trim was replaced and the door lock, weather strip, screen, sill, etc. was also fixed up. The sides have also been caulked and painted but will eventually need to be replaced. The big job this summer is to fix the floor. A one-inch bolthole for the roofwalk must have leaked for years. The finish floor had a two-foot hole but the sub floor was rotted out in a four-foot radius. The 6 x 12 southern pine floor beams were mostly OK but the tops lost an inch here and there. Photos show repairs to the sub floor that included shims and appliqués to the floor beams. I should have the finish floor back in soon. However, another foot or so of bad sub floor is under the stove. I’ll fix the hole and aisle before I move on to that.  End Repairs Not ignoring the exterior, Buzz rebuilt the end door and cleaned and repainted the end.  North Side And the north side has been caulked, primed, and re-painted. This will buy us time and looks really good. But it is a wood car 'living' outdoors. We are lucky to have a skilled volunteer giving his time and effort so generously. Can we respond and donate funds to the R1400 fund to help get this indoors? Please help. |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]