Wood Shop

Entries from Sunday, January 31. 2010

Sunday, January 31. 2010

Wood Shop Update - January 30, 2010 Posted by Robert Kutella in Wood Shop at 05:08

Comments (0)

Wood Shop Update - January 30, 2010

Complete

Victor Humphreys is doing the final inspection on the eight completed new windows for the N&W 2050 cab. The sawdust phase is over, next will be priming, painting, and glazing.

The Jig

Tim Peters demonstrates a jig he constructed to drill a sort of angled pocket hole to mount the new CRT 1268 upper sash windows. Now, if we had April weather some of these completed windows would be finding their way onto the side of the car!

Design Time

Rich Witt spent some time taking measurements and creating a design drawing for the new CA&E 409 sash. This provides a reference document as well as trains us to determine the sequence of steps needed to construct the new frame.

More Window Work

Randy Hicks, working as project manager, explains details to Greg F. Ceurvorst as Greg worked the day on two CA&E 319 windows; stripping paint and hardware, and priming them before days end. Apologies to Greg as I know I butchered his name - asked him yesterday and did not write it down.

« previous page (Page 1 of 1, totaling 1 entries) next page »
Frontpage

Blog Administration

Open login screen

Find us on Facebook

Category Tree

Calendar

Quicksearch

Comments

Nick D. about Polishing up on the polishing...
Sun, 05-19-2013 22:13
Hello again. I had an idea that was (somewhat rudely, mid-sentence) dismissed in talking to a museum volunteer a few years back, but here it goes [...]

Thomas Bernacki about CGW X38 Update - May 15, 2013
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.

Nigel Bennett about Steam Department Update 04-27-2013
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel

Wally Unglaub about Signal Department - May 11, 2013
Mon, 05-13-2013 11:08
"THUMBS UP!"

Robert Kutella about CGW X38 Update - May 8, 2013
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]

Bob Vaughn about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]

Kirk Warner about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?

Wally Unglaub about NEW TROLLEY BUS LOOP
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.

hyde seybold about Steam Department Update 04-27-2013
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?

Jim Froida about Photo Gallery stats as of November 24, 2012
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP

Wally Unglaub about NEW TROLLEY BUS LOOP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.

Wally Unglaub about CGW X38 Update - May 1, 2013
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!