| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Sunday, February 21. 2010Wood Shop Update - February 20, 2010 The Rout to Success Victor Humprheys is setting up the router as we get a little creative in using this tool for an unusual task.  Good Supervision is Important Randy Hicks considers the job Greg Ceurvorst is doing to sand more windows for CA&E 319.  Prime Paint Tim Peters has made up a wheelbarrow load of new trim pieces for the new clerestory windows (now installed) on CRT 1268. And of course they all need painting to be ready to install as time goes by.  Dust Pickup Another of our largely invisible ongoing work tasks is maintaining the shop and tooling. Jerry Lynn trims and fits a new custom made dust pickup hood for our Delta HD shaper. Earlier, he installed a new duct and drop for this machine. THANK YOU, Jerry! And a lot of other work was noted in the shop area, in spite of me not taking time out to snap pics. Three additional new window sash were glued by Buzz M and Victor H for the MILW 01984 caboose. More work on a new door by Bob K and Victor H.; the new CNS&M herald applied in Barn 2 to the NS 749; work continuing on the Cleveland PCC project; retriever/catcher cleaning and rebuilding by the trolley coach department; more condiut and wiring for the new shop space addition on Barn 4; and I am sure a bunch of work I did not mention or note here. STEAM FANS - welding of the new tube sheet patch on the front end of the Shay was being done!!! |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]