A lot of work has been happening on the 451 over the past few days. Some of the windows have been removed and are being cleaned and the brass polished. The original scheme for this car did not have paint on the window frames. The outside doors are beginning to be cleaned and prepped, bondo applied and soon to be primed. A lot of cleanup work was done on the east end with the door corner posts and the roll sign box. All the rotted steel was removed and new steel was cold rolled and welded in place. The most difficult part at this point is still coming up with the correct color of gray. The samples we have received to date have all been matched exactly, however, the color on parts of the car do not match those samples. We will be matching two more shades of gray, which will likely be the colors used for the gray on the original 451 scheme, and the second being the gray on the 319.
Additional photos have been added to the CA&E 451 Restoration Gallery. To continue this aggressive restoration project into the Priming and Painting stage, additional monies and donations are still needed. To help with this project, please consider a donation to the Electric Car Department Car Painting Fund, your support will be appreciated.
Comments
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]