| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Sunday, March 28. 2010PART TWO - Wood Shop Update - March 24, 2010From the camera of John Nelligan, here are some more images of the shop work producing new battens for the depot. I will present this as a short photo essay, not to bore you with a lot of text.  The Set Up Rich Witt, Henry Vincent, and Bob Kutella install a set up of fences and featherboards for the table saw.  Ripping Three pics here showing Pete Galayda, Henry Vincent, and RIch Witt ripping 14 foot long boards into the correct width for the battens.  Ripping  Ripping  Planing The next step was to plane the strips to the needed thickness and here, John Faulhaber is feeding our old faithful Boice Crane planer.  The Crew Bob Kutella, Rich Witt, Pete Galayda, John Faulhaber, Henry Vincent, and Victor Humphreys all worked a long day and are shown here behind a stack of nearly 1100 feet of blanks ready to be fed into the shaper for final profiling. |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]