| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Thursday, June 10. 2010CCW 300 Update - June 9, 2010 Framing Pete Galayda is continuing on this large project. He has moved to the second end of the locomotive and has cleaned and primed the steelwork in this photo. John Nelligan looks on (supervises) from inside the cab. Pete has also completed a fairly extensive re-build and restoration of the roof mounted fusebox.  Mysteries Meanwhile John Nelligan continues to delve into the mysteries of electrical schematics and wiring. After the locomotive arrived at IRM there was the usual flurry of activity and this resulted in several rats nests of disconnectied wire and cable with no documentation of about what went where and what any of them do. In this pic John is burrowing under one of the hoods as he attempts to unravel some of the mysteries. Monday, June 7. 2010ME 28 Update - June 6, 2010 The Door Ray Schmid was busy mounting a lot of the many hardware and trim items for the new baggage door, number two.  The Door And Jeff Brady was also carefully measuring, drilling holes and getting everything mounted. Friday, June 4. 2010CA&E 319 painting update Red and Gray completed Jim Followell and his helpers finished painting the gray this past Wednesday and the red was completed today. Sometime tomorrow the 319 will be moved out of the diesel shop back over to barn 8, and the 409 will be brought into the diesel shop.  Randy Hicks removing the window masking  Stained glass windows Additional photos have been added to the CA&E 319 Restoration Gallery. To continue this aggressive restoration project with lettering and painting trucks and underframe accessories, additional monies and donations are still needed. To help with this project, please consider a donation to the Electric Car Department Car Painting Fund, your support will be appreciated. |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]