The work on the LA Brill 8002 is continuing. The interior has been completely cleaned out and the old rubber flooring has been taken up. There are sections where the glue has a very strong bond with the wood floor. Those sections need to be hand scraped, which has been started.
Yesterday Richard Schauer and I worked on removing the old roofing material. 20 years ago the original tongue-in-grove roofing was covered with a temporary fix of plywood to keep the inside dry. Both were in poor condition and were removed. Careful measurements and patterns were kept so we can replicate the original roof. All the interior Masonite will need to be removed and most has. We are keeping sections of this also for patterns. In the weeks to come we will be continuing to remove what remains of the roofing, Masonite and de-Garrett-izing the coach (removing all the modifications that were made post-service by Garrett Industries, the 1st post-LA owner).
Comments
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]