Wood Shop

Entries from Sunday, January 16. 2011

Sunday, January 16. 2011

Wood Shop Update - January 15, 2011 Posted by Robert Kutella in Wood Shop at 04:29

Comments (0)

Wood Shop Update - January 15, 2011

I want to thank those who have taken the time to send reports and photos during the period I am laid up. Here are some views from the camera of Tim Peters.

A Ripping Good Time

Tim Peters, with help from Buzz Morisette, is ripping new poplar planks for new tack molding for our CTA 4000 cars. Earlier this week he ran test pieces through our FAY molder so now is the time to prepare all the stock for the 'production' run.

Fun at the Saw

This piece is leaving the saw. I thought we were supposed to be having fun, working at IRM. From Tim's expression, I hope this was not too painful!!

More Saddles

Randall Hicks finished making a set of new saddles for the Chicago Aurora & Elgin 319, and Brother Chris Buck was drafted to start the priming and painting phase.

« previous page (Page 1 of 1, totaling 1 entries) next page »
Frontpage

Blog Administration

Open login screen

Find us on Facebook

Category Tree

Calendar

Quicksearch

Comments

Nick D. about Polishing up on the polishing...
Sun, 05-19-2013 22:13
Hello again. I had an idea that was (somewhat rudely, mid-sentence) dismissed in talking to a museum volunteer a few years back, but here it goes [...]

Thomas Bernacki about CGW X38 Update - May 15, 2013
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.

Nigel Bennett about Steam Department Update 04-27-2013
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel

Wally Unglaub about Signal Department - May 11, 2013
Mon, 05-13-2013 11:08
"THUMBS UP!"

Robert Kutella about CGW X38 Update - May 8, 2013
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]

Bob Vaughn about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]

Kirk Warner about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?

Wally Unglaub about NEW TROLLEY BUS LOOP
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.

hyde seybold about Steam Department Update 04-27-2013
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?

Jim Froida about Photo Gallery stats as of November 24, 2012
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP

Wally Unglaub about NEW TROLLEY BUS LOOP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.

Wally Unglaub about CGW X38 Update - May 1, 2013
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!