We had a big crew yesterday and accomplished a ton of work. Glenn Andersen’s nephew Gary is heading up the project to stabilize, make safe and presentable the front of the Dayton Flyer 960, which is currently in the front of the Andersen Garage. He brought along his construction expert and neighbor Gary, along with high school art teacher Penny. Gary took measurements and made some preliminary plans for getting the display “visitor-ready”. Penny took pictures inside one of our other Dayton Flyers (925) and will commission some of her students to paint a mural depicting the inside of coach to be placed behind the 960’s front end.
Meanwhile, Richard Schauer, Wally Unglaub, Bill Moran and I got to work on tire mounting. Over the past several weeks, we have been working on removing the tires from Seattle Twin 633 and SF Fageol 614. They were delivered to our tire guy where the rims were rehabbed, painted, and brand new tires mounted. They came back a couple weeks ago and of course we were eager to get them back on. With today’s crew, we were able to just about finish the project. The hubs were very rusty and the wheel wells were coated in crud. We cleaned out all the wheel wells and were able to prime and/or paint all but one hub. We mounted one set of rears on the 614 and with the additional help from Warren and Steve from the Diesel shop, we completed the 633! At the end of the day, we took the 633 out for a couple fantrips to test out the new tires. They make a BIG difference!!! Since we had to pull the Edmonton BBC 181 out to access the 633, we exercised it as well. It performed flawlessly as usual.
Those two sets of tires consist of a discontinued size and have to be special ordered. Needless to say they were not cheap. I’d like to thank EVERYONE who has supported us with donations. YOU made this purchase possible. It is reassuring to know that we will never have to purchase tires for these two coaches again!!! Over the past decade, we have outfitted over a third of the fleet with new tires, and several others have come to us with tires that are in good shape.
Also visiting during the day was Bob Heinlein. He and Richard continue planning for the March 27th Snowflake Special trip. Tickets are NOW ON SALE in the online store. We are planning on a six-car train and due to logistics, this is the maximum size train for this trip. No additional cars will be added, so get your tickets early before they sell out!
Next weekend our goal is to get the remaining tires mounted onto the 614. Once the tires are done, we will turn our attention to cutting the wood carlines and starting to install the wood part of the roof of the LA Brill 8002. In addition to tire duty, Wally loaded all the milled lumber for the roof into the coach in preparation for that next job.
Thanks to everyone who worked with us today. We could not have accomplished as much as we did without each and every one of you. THANKS!!!
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]