Tuesday night, another in the seemingly endless repeats of severe lightning infested squall lines of thunderstorms passed over IRM. Power went out early but Edison came out and restored service. Only to have it fail for good about 5 AM. Calls again were made and it was determined that the primary transformer, owned by Edison, fell victim. We believe this unit was installed at IRM about 1987 and at that time, itself was previously used. This supplies voltage and current to EVERYTHING on site, including to our rectifier sets supplying trolley power, as well as heat, light, water system, freezers and coolers in our diner, telephone system, office services and computers, waste pumping to the drain fields, all sorts of things you take for granted.
Volunteers on site and staff members worked most of the night, some with little or no sleep, and throughout a hot muggy day to do what was possible. Portable generators were broken out and started to provide backup for some of the critical items. Extension cords everywhere were the order of the day. The grounds were open FREE for walk in visitors only, no barns open, no rides.
Victor Humphreys is shown with our recently departed transformer already disconnected in the substation yard. To their credit Edison responded in force with several line crews, despite another 50,000 customers without power in our immediate service area, from the overnight storms. By evening a new transformer had been located, transported to IRM, a crane rented to pull the old unit (4-5 tons weight) and the new one dropped in. The lights came back on!
You cannot buy the type of help provided by our people, in very challenging conditions. Many came to our aid from their regular 'day jobs' and all the staff responded in kind. Thanks go out to everyone, now take the day off for some well deserved rest.
Just to make it interesting the LEVIATHAN was on site as previously reported.
Here it is on the steam leads east of Barn 9. The tender has been reunited with the locomotive and the stack is on. Mechanics worked under and around it making connections and hookups, adding the headlight, pilot, steam dome trim, etc.
This is the engineer's side of the engine, clearly sporting the decorative paint and brasswork behind one of the service rigs that was used to transport it to IRM.
Comments
Sun, 05-19-2013 22:13
Hello again. I had an idea that was (somewhat rudely, mid-sentence) dismissed in talking to a museum volunteer a few years back, but here it goes [...]
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!