We sure did not want to miss this year's Vintage Transport event - we hope you did not miss it.
There was a monsoon like heavy downpour about 9 AM and that changed the plans of Tim Peters. So he retreated to the shelter of our wood shop and was busy fabricating new body panels for his restoration project.
Both Saturday and Sunday the track gang was working hard on the project to relay track in Barn 3. They are gathered east of the Barn and doing some heavy lifting.
The crew is being led by Adam Robillard and they are assembling new units of panel track which will be stockpiled and made ready to replace the badly deteriorated track 34 inside the building. Side benefit - they had a ringside seat for all the activity sorrounding the Leviathan.
The 63 turned the first wheel under its own power at IRM Sunday afternoon. It had been fired just outside and to the west of Barn 2. It has just whistled off, the cylinder cocks are open, and the throttle is being cracked.
Having cleared the yard 2 leads, the 63 waits for the signal to clear for a move east onto our mainline.
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]