Wood Shop

Entries from Monday, September 12. 2011

Monday, September 12. 2011

News and Views - September 10 ad 11, ... Posted by Robert Kutella in Wood Shop at 15:42

Comments (2)

News and Views - September 10 ad 11, 2011

Armed with good intentions, I caught this view of John Faulhaber early in the morning.

Taking a Shine to It

John worked over several seat handles destined for Sand Springs 68 at our buffing and polishing station. He did a good job!

Then a multitude of activities over both weekend days seemed to keep my hands busy to where no more photos got taken.

John Mc Kelvey continued faithfully reupholstering North Shore seats, and prep work continued for our upcoming hosting the national Old Wood Working Machine convention. This is a fascinating event with clinics and demos that would interest many of you for the weekend of 9/24 and 9/25. But sorry, it a closed event and requires pre registration. Museum work in the wood shop area will be suspended for those two days.

Victor Humphreys took advantage of good weather and over both days, sanded and re primed about a half of boxcar side. A LOT of work for one guy. Some efforts were spent starting to get things ready for the upcoming Members Showcase activities.

And just like that, it was time to go home.

« previous page (Page 1 of 1, totaling 1 entries) next page »
Frontpage

Blog Administration

Open login screen

Find us on Facebook

Category Tree

Calendar

Quicksearch

Comments

Thomas Bernacki about CGW X38 Update - May 15, 2013
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.

Nigel Bennett about Steam Department Update 04-27-2013
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel

Wally Unglaub about Signal Department - May 11, 2013
Mon, 05-13-2013 11:08
"THUMBS UP!"

Robert Kutella about CGW X38 Update - May 8, 2013
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]

Bob Vaughn about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]

Kirk Warner about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?

Wally Unglaub about NEW TROLLEY BUS LOOP
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.

hyde seybold about Steam Department Update 04-27-2013
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?

Jim Froida about Photo Gallery stats as of November 24, 2012
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP

Wally Unglaub about NEW TROLLEY BUS LOOP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.

Wally Unglaub about CGW X38 Update - May 1, 2013
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!

Terry about Steam Department Update 05-04-2013
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]