Wood Shop

Entries from Thursday, October 20. 2011

Thursday, October 20. 2011

Wood Shop Update - October 19, 2011 Posted by Robert Kutella in Wood Shop at 10:04

Comments (0)

Wood Shop Update - October 19, 2011

Today will be a series of short posts - lots going on with MANY projects.

Sign Frame

Henry Vincent has designed and is building a substantial frame toward displaying a vintage Pennsylvania photo mural.

Trimming

Rich Witt assists Henry in trimming off a ragged edge on the mural. This had been stored and moved for many years at IRM and some damage resulted from the handling. Volunteer Bill Leiter has promised to use his graphic arts experience to help restore some of the damaged areas.

Canvasing

I know this is a poor image but a tough environment to get a better one. Tim Peters and Frank Sirinek spent most of the day stretching and tacking down new canvas on the roof of wood car CRT 1979.

Siding

Henry Vincent and Gerry Dettloff spent part of the afternoon installing new siding on Lake Shore Electric 810.

« previous page (Page 1 of 1, totaling 1 entries) next page »
Frontpage

Blog Administration

Open login screen

Find us on Facebook

Category Tree

Calendar

Quicksearch

Comments

Thomas Bernacki about CGW X38 Update - May 15, 2013
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.

Nigel Bennett about Steam Department Update 04-27-2013
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel

Wally Unglaub about Signal Department - May 11, 2013
Mon, 05-13-2013 11:08
"THUMBS UP!"

Robert Kutella about CGW X38 Update - May 8, 2013
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]

Bob Vaughn about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]

Kirk Warner about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?

Wally Unglaub about NEW TROLLEY BUS LOOP
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.

hyde seybold about Steam Department Update 04-27-2013
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?

Jim Froida about Photo Gallery stats as of November 24, 2012
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP

Wally Unglaub about NEW TROLLEY BUS LOOP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.

Wally Unglaub about CGW X38 Update - May 1, 2013
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!

Terry about Steam Department Update 05-04-2013
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]