Diesel Department

Entries from Thursday, December 1. 2011

Thursday, December 1. 2011

BN 9908 progress Posted by James Kolanowski in Diesel Department at 16:43

Comments (6)

BN 9908 progress

More rust removal on the left and welding back together on the right.

On Tuesday night, Kyle M worked to remove some additional rot spots on the engineers side of the nose. This takes some time since there are a few layers of steel skin and angle iron supports to cut through, and not hit anything behind it all. Meanwhile I started to weld some new steel supports around the firemans side nose, along with adding some support to the side of the mount for the cab signal box. A new sheet has been cut to wrap around that side, and will be fitted and installed in the coming days. There are many more photos available than are shown in this blog, and are shown here with the most recent being shown first. This photo album will more than likely be updated more often than the blog, but we'll do our best to keep both up to date.

More rot removed from the engineers side of the nose.

We chose to use smaller sections of thicker angle instead of a continuous piece around the curve of the nose.

« previous page (Page 1 of 1, totaling 1 entries) next page »
Frontpage

Blog Administration

Open login screen

Find us on Facebook

Category Tree

Calendar

Quicksearch

Comments

Thomas Bernacki about CGW X38 Update - May 15, 2013
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.

Nigel Bennett about Steam Department Update 04-27-2013
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel

Wally Unglaub about Signal Department - May 11, 2013
Mon, 05-13-2013 11:08
"THUMBS UP!"

Robert Kutella about CGW X38 Update - May 8, 2013
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]

Bob Vaughn about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]

Kirk Warner about CGW X38 Update - May 8, 2013
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?

Wally Unglaub about NEW TROLLEY BUS LOOP
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.

hyde seybold about Steam Department Update 04-27-2013
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?

Jim Froida about Photo Gallery stats as of November 24, 2012
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP

Wally Unglaub about NEW TROLLEY BUS LOOP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.

Wally Unglaub about CGW X38 Update - May 1, 2013
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!

Terry about Steam Department Update 05-04-2013
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]