Electric Car Department

Entries from Monday, December 12. 2011

Monday, December 12. 2011

CTS 4223 Update - December 10, 2011 Posted by Robert Kutella in Cleveland Transit System 4223 at 05:30

Comments (0)

CTS 4223 Update - December 10, 2011

Installation

The weather has turned much colder so work in the Barn means hats and coats. But a lot of the parts are going back on the car! Alex Randow seems to be enjoying a private joke, smiling broadly, as he runs a tap into the threaded holes in the side band mounting pads. This serves to clean them out - removing any paint accumulated inside these.

Strike Up the Band

Alex, Eric Lorenz, and Lorne Tweed worked to mount each band. These are low on the car sides, and served as rub bands while negotiating the street traffic in Cleveland. There are a lot of machine screws to drive to complete the installation.

Left Side

All bands are mounted on the left side. The final finish coat of paint will be applied after they are in place and when the weather warms up, or we can move the car to a warmer shop. More parts, including the retriever ring and retriever now appear on the car.

Windows

Yes the inevitable "W" word. Lorne Tweed was cleaning and prepping more of the sash for the side windows. Will it never end?

« previous page (Page 1 of 1, totaling 1 entries) next page »
Frontpage

Blog Administration

Open login screen

Find us on Facebook

Category Tree

Calendar

Quicksearch

Comments

Wally Unglaub about Wood Shop Update - June 15, 2013
Mon, 06-17-2013 09:50
Wish I could be there to help.

Nigel Bennett about Steam Department Update 06-08-2013
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]

Matthew Gustafson about Steam Department Update 06-08-2013
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]

Brian Davies about Steam Department Update 06-08-2013
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]

Nigel Bennett about Steam Department Update 06-08-2013
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]

Hyde Seybold about Steam Department Update 06-08-2013
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]

Jim about Photo Gallery stats as of November 24, 2012
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!

Nigel Bennett about Steam Department Update 06-01-2013
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]

Nigel Bennett about Steam Department Update 06-01-2013
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]

Hyde Seybold about Steam Department Update 06-01-2013
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?

Hyde Seybold about Steam Department Update 06-01-2013
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]

anon about RI 2612 project: May update
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]