| BLOG | DIRECTIONS | SCHEDULE | STORE |
|
|
| BLOG | DIRECTIONS | SCHEDULE | STORE | |
Friday, February 3. 2012Wood Shop Update - February 1, 2011 Weatherstripping I resisted titling this image with the ubiquitous WINDOW caption. But Roger Kramer is installing weatherstripping on some of the nearly finished shop made windows for the GLEN SPRINGS  Photos Henry Vincent is project manager for our proposed model railroad display and he cannot wait to get to work. He has hand made frames for many of the pictures from the layout in Milwaukee and they now provide 'shop art' in our new addition to the shop space.  Painting Some view painting as a necessary evil at best, but it is a critical step to restoring and preserving equipment. George Clark is painting the first coat of finished orange on new siding for Lake Shore Electric 810.  Repairs Henry Vincent is discussing a repair to a baggage wagon tongue with Victor Humphreys. It looks they are enjoying this too much for words.  A Chiseler Last weekend Jon Fenlaciki caught me in the act of fitting new mortise and tenon joints, paring wood carefully by hand with a chisel. Not really news, but here I am - guilty as charged. Friday, February 3. 2012TMS Project Update - February 1, 2012 Truck Work Gerry Dettloff works on fabricating new rods for the rebuilding of the truck on TM 972, and my camera tagged this image as number 972! Work continues on a regular basis for this truck. Most of the dismantling is done and now the hard part is to fabricate pieces to reassemble it.  Pins New ground for us is to fabricate and heat treat the hardened pins needed to replace time worn pins in the truck assembly. Gerry is set up to cut some new rod, and Rod Turner has a new small furnace for doing the required heat treating in stages. Very impressive for our restoration specialists! |
Blog AdministrationFind us on FacebookCalendarQuicksearchArchivesSyndicate This Blog |
Comments
Sun, 05-19-2013 22:13
Hello again. I had an idea that was (somewhat rudely, mid-sentence) dismissed in talking to a museum volunteer a few years back, but here it goes [...]
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!