Gerry Dettloff works on fabricating new rods for the rebuilding of the truck on TM 972, and my camera tagged this image as number 972! Work continues on a regular basis for this truck. Most of the dismantling is done and now the hard part is to fabricate pieces to reassemble it.
New ground for us is to fabricate and heat treat the hardened pins needed to replace time worn pins in the truck assembly. Gerry is set up to cut some new rod, and Rod Turner has a new small furnace for doing the required heat treating in stages. Very impressive for our restoration specialists!
Comments
Sun, 05-20-2012 17:31
I would like to make a note of a couple of things. The sandblasting process involves taking the sand like material, called blackblast, and smashing it [...]
Fri, 05-18-2012 22:48
This is one interesting freight car. I've been browsing images on-line of these B&O wagon-top cars lately, and noticed a variety of lettering and [...]
Fri, 05-18-2012 12:03
Mark, Its hard to say if 760 will be running in early July. It will be for Diesel Days, but I can't answer yet if we'll have it ready sooner than [...]
Thu, 05-17-2012 13:13
Im going to drive from California to the Chicago area in early July and staying for about 3 weeks. Im a big fan of FM units. Any chance the MILW 760 [...]
Sun, 05-13-2012 11:44
Line sidewalks and steets with rail ties and fill with small pea gravel. Similar to construction near Lincoln Home in Springfield, IL.
Fri, 05-11-2012 10:45
Thank you. If you are send pics to Irm in mail,Please make it attention Roger Kramer. Thanks..
Thu, 05-10-2012 17:08
I will be sending some color photos of the CGW 285 shortly after rebuilding by the CGW. And yes, they had chrome grabs and the end gate. I had been [...]
Thu, 05-10-2012 12:58
Yes there are some chrome plated partsespecially on the sissors gate. Unfortunately, they were recently taken off, and left in the gravel. I have [...]
Thu, 05-10-2012 00:46
The book "Chicago Great Western Color Guide" (Morning Sun) has some interesting notes about these CGW combines: [BEGIN QUOTE] "In 1954 the CGW bought [...]
Sun, 05-06-2012 21:42
Nigel, What you just told me is great news. YOU clarified things for me.
Sun, 05-06-2012 20:34
Wally, I must say that I am puzzled by this comment. The whole driver for the current work is the major FRA mandated inspection (15 year 1472 [...]
Sun, 05-06-2012 16:39
I am just afraid that by the time 1630 is up and ready to run, it will have to be dismantled again to do the Federally mandated inspection. I am [...]