Eric Lorenz and Lorne Tweed are going over an electrical cabinet that lives below the front dash at the end of the car. The old one is in pretty sad shape and a lot of the framing and cabinet work will need new parts fabricated. This step is all part of the work needing to be done and getting wires pulled, before installing the new glass windshields and painting that area.
Here is a better look at the switches and fuse blocks that live in the above cabinet. Sketchy schematics, lots of cut wires, missing elements and fuses. Did I mention it was dirty?
Of course we need to mention windows in any such BLOG entry. Alex Randow works on these pretty regularly and he is checking the growing pile of completed sash. 17 large sash and 18 small sash are now complete.
Alex also worked on cleaning up several old panels and trim work needed for the car interior. These represent items in good enough shape to re-use, and as explained previously, several items need to be re-installed before the side window areas can be completed. Note that these now shine like new metal, you would not have thought this possible if you examined them before his work. It did not happen by accident.
Keith Letsche walked in Sunday and volunteered to do more window sash. This project is mostly a Wednesday/Saturday crew and this unexpected work only adds to and advances the work. Thanks, Keith.
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]