Chicago Great Western X 38 Russell Snow Plow

This day was HUGE in the work and progress made on the Russell plow.  Weather was good and many willing volunteers turned out to lend a hand.  This very productive day made up in part for the recent dog days of near 100 F temperatures where neither man nor beast was able to function for long outdoors.  BTW the next three days are forecast to return to 90-95 F.

Move to the Rear, Please

Dick Cubbage has moved on to the rear of the plow, seen here working on the rear end sill.  Both he and Kirk Warner spent some extra days on the project this week and the progress really shows.

The Old Grind

Tom Bernacki did many tasks throughout the day, seen here inside the box, grinding welds smooth on the rear wall.

Drill It

Victor Humphreys also spent all day on the plow, seen here inside the shop drilling holes to mount a new left rear corner post.  The counterbores were done earlier in the day by John Faulhaber assisted by Tom Bernacki.  They provide relief for the many rivet heads inside the box.  In the morning this was just a stick of wood, by the end of the day it was fitted, prime painted, and installed.

Knock Em Out

Victor was inside the box here, knocking out old bolts and metal stubs that at one time held the original framing timbers, now gone.  To his left you may be able to make out new framing for the right side door, fitted and installed.

Door Framing

From the outside here is the door completely framed out - note the shiny fasteners around and above the opening.  To help make this possible, earlier Mike Alterio helped by straightening the right grab iron which had been bent up in its earlier life.  Tally for the day was five new pieces of framing completed and installed.

NeedleChipping

Kirk Warner spent much of the day needlechipping and here he is working "In the Curl" of the front of the plow.

Lower the Boom

The project has benefited greatly from the loan of a boom truck from Dave Diamond and the B&G Department.  Thanks, Dave!  Kirk Warner is in the distance on some scaffolding while Jim Leonard is in the bucket.

Mean Jim

Jim is one of the nicest guys out there, but in this pic, he looks like he really means business!

Left Corner

Tom Bernacki here is wire wheeling the last nubs of old paint away on the lower left corner.

Time to Prime

Jim Leonard was back in the bucket to begin priming some of the cleaned areas by mid afternoon.  That truck really improves mobility and safety, AND - there are no wasps living in the boom!

Meanwhile Out Back

Kirk Warner had the primer and was applying it to the end sill and about one third of the back wall.

Big report, big crew, big list of completed work!  Thanks to one and all for supporting the project.