We split the crew today, more on that later. Here Dave Rogan and John Faulhaber are ready to try to open the left side wing on the plow. They had already done some of the prep work and fixed more air leaks, and charged the reservoirs to 50 psi. This had never been tried at IRM and perhaps not been moved during the previous 20 years.
Many of the volunteers migrated to what we hoped would be a successful trial. We had several working - Dave Rogan working the controls up in the cab, Henry Vincent watching the air pressure gauge inside, others to pass along verbal instructions. IT MOVES!!! We all expected loud squeaking and protests from the hinges, but it was completely smooth and quiet - we almost missed it.
Here, Henry Vincent, Buzz Morisette, John Faulhaber, Dave Rogan and Rich Witt beam proudly. To deal with one of the leaks, we removed the whistle valve and capped the air pipe. In the shop Rich Witt dismantled that, and we found the spring inside had been assembled in the wrong position - apparently an artifact from an indifferent mechanic on the CNW.
There it was wide open, and we peered to see behind what had been
cloaked to all of us. The CNW never opened them up when repainting, and
the last CGW orange paint remained. Henry and Rich Witt look for clues
Gerry Dettloff fabricated a new steel strap to support the roofwalk. One was missing due to a broken weld and we needed it in place to continue installing interior wood framing on the back wall. The bolts pass through the straps, end wall, and the wood timbers.
I opened this entry saying we had split the crew. Here, Victor Humphreys and Jim Leonard work to repaint the Borden's Milk Car. Prepped and primed last week, it was now time for the first coat of finish paint. In true IRM spirit they continued the painting during the plow wing moving tests. Thanks guys!
Comments
Mon, 06-17-2013 09:50
Wish I could be there to help.
Fri, 06-14-2013 16:50
Matthew, Any special event is the decision of the museum Board. My personal opinion is that it is likely that there would be a special event to [...]
Thu, 06-13-2013 18:33
Hi, I have a question, if or when she is restored and back up and running this or next year. Will their be a special event set up for the return of [...]
Tue, 06-11-2013 22:36
The whistle 1630 wore for a while that you're thinking of was a Frisco 6 chime donated by a former member of the steam shop. It was on it a few times [...]
Tue, 06-11-2013 18:03
You are talking here about something well before my time !. I have not seen her with anything other than the whistle she now carries. If she [...]
Mon, 06-10-2013 16:17
i'm curious here. Will 1630 ever wear the ATSF 6 chime she had on for a while? Better defines her, I love the deep whistle she has now but the higher [...]
Sat, 06-08-2013 15:15
Many many many many many thanks for getting the Spaulding webcam working!!!!!
Fri, 06-07-2013 16:55
The donation was to the museum as a whole. How it is used and whether any comes to steam department projects will be the decision of the museum [...]
Fri, 06-07-2013 16:53
Basically the plan is "ONLY" reassembly. As far as we know she is is reasonable mechanical shape. The big mechanical problem that stopped her (slack [...]
Fri, 06-07-2013 16:28
Nigel I read you guys got a one million dollar check donation!!! Will this be used to finish 1630 ,428, 5 and get started on the others next in line?
Fri, 06-07-2013 16:16
So does 1630 basically only need reassembly? With the boiler in particular. Does her tender or running gear need any work before she's ready for the [...]
Fri, 06-07-2013 12:00
Hello.. The voltage we are using and presumed the RR also used is 120 vac. The system is a little unique because the lite bulbs are each 60 volts. [...]