This was a very productive day for accomplishing a much needed repair to the car. There were a lot of players including some of our SKILL LEVEL experts. The problem: the door on what is now the south side of the car could not be opened.
The roof framing and door track on the top of the car had been bent downward and inward at some time in the past, resulting in a bind that prevented the door from moving at all, at least with the resources available to mere mortals. Lots of cribbing, timbers and a heavy duty pneumatic jack on the inside of the car got some upward pressure to free it up. John Faulhaber is marveling at the open door, an unseen mystery of the ages. And of course not be missed is the rare shot of this car on Track 41 at the east end of Barn 4.
With the door fully open, it was time to make 'adjustments'. The crew is here engaged in a further tweak of the frame and door track upward, more jacking, a little heat from the torch, and it is much better.
Comments
Thu, 05-16-2013 21:52
Looking good Bob! I hope to come out soon once I'm done with school.
Wed, 05-15-2013 21:28
I was not around at the time. General discussion suggests that it was "pretty marginal" in a number of areas. Nigel
Mon, 05-13-2013 11:08
"THUMBS UP!"
Fri, 05-10-2013 02:15
No, it will not be necessary to hold any of the work waiting for the plow to be turned, end for end. Weather will be the major factor, but there will [...]
Thu, 05-09-2013 19:54
The CGW X-38 plow is really coming to life. Bob Kutella and Vic and crew need to be very proud of your collective efforts. I am very appreciative of [...]
Thu, 05-09-2013 15:20
The snowplow looks great! Are you going to apply the door and upper windows befor it is turned to continue work?
Thu, 05-09-2013 09:09
Max, Is there any progress to report yet, in regards to the installation of the poles and overhead wires? Have a good day, sir.
Wed, 05-08-2013 18:40
Thanks for the update! I still don't understand why Commonwealth #5 was removed from service. Do you know why?
Tue, 05-07-2013 09:28
Mr. Kolanowski.....I was just wondering if the Spaulding webcam will be up and running soon for us stay-at-homes. Thanks!2FP
Mon, 05-06-2013 23:04
Max, Has work begun yet on the construction phase of erecting the poles and putting up the wire? Wish I could be there to watch it happen.
Mon, 05-06-2013 23:02
Keep up the good work, Bob. Wish I could be there to help!!!!!!!
Sun, 05-05-2013 18:53
Ah yes, I have made such Jibs myself. If it were me, I would add in each corner an angled piece from the base to the Jib to act as sway bracing. [...]