The first order of business is to thank all of you for support in my ongoing camera 'crisis'. At least it is a crisis to me. Seven days from now I should be receiving my second new camera; the first is being returned with several problems. Do not buy a camera at discount with a REFURBISHED sticker on the box. Meanwhile thanks for your patience as we both suffer along.
The second order of business is to reply to a comment about the electric motor on a tablesaw we are restoring for the shop.
If I was able to produce a good photo I would leave it at that. Here is the info from the badge. I read a patent date of March 20, 1894. Since patent rights typically run 14 years, we can be pretty confident this machine is over 100 years old. (There would be little reason to post a patent number which had expired.) General Electric Induction Motor, Type KT 4-5A, 3 Phase, 60 cycle, 220 Volts, 5 HP, 1800 rpm, 13 Amps, Form C.
There can be few who do not recognize Randy Hicks. He labors continually for the betterment of our Chicago Aurora and Elgin collection; he is shown here applying the first blue paint to a window of CA&E 36. But he also is a big 'booster' for IRM and works behind the scenes in areas to benefit IRM as a whole. Thanks, Randy.
Victor Humphreys makes the final touches in cleaning up three completed NEW windows for our Chicago Great Western X 38. Now, if only the weather were better we could install them at once.
We did a lot of 'shop maintenance' tasks in the morning but moved ahead on the project to make two new doors for the CGW X 38. We did the final ripping and sizing of the parts that were rough cut a week or two ago. Rich Witt and Victor are checking how it will look, as we laid the parts in their orientation on the shop floor.
These two doors will have wood panels in the bottom half of each one. So, we sized the wood for those, here Victor is stacking and bundling enough parts for four panels. Then we moved on to make more sawdust. In this case we need to make about 60 feet of one half inch radius quarter round molding out of poplar. This is not commercially available so we make our own. We took the cutoffs from previously sized parts, and sawed and planed that to be ready to do the molding profile next.
Eric Lorenz is checking rows of interior metal trim parts for the Cleveland Transit System 4223. Finding them would be a great accomplishment in my book. But did we have them all, and how do they fit in the car? We have builders drawings but the parts did not match up. It was sort of like doing a jigsaw puzzle without using the picture on the box. He (and I) were quite pleased when Eric solved the "Mystery at the Museum" and determined that all pieces needed are present and accounted for. Next - help wanted to clean off old paint and rust and get them primed and ready to install.
Tim Peters is cleaning out one of the 144 mortises he made this week. Wait I lied, there are really 288 slots that were cut. Four per window times 72 windows, for Chicago Rapid Transit 1024.
Meanwhile the Passenger Coach Department continues with work in the shop area. Shelley Vanderschagen is sanding new ceiling panels for the Private Car ELY.
Buzz Morisette also makes blocking for the new ceiling in the ELY in the shop. Then hikes to Barn 3 and installs them. So, just yesterday three of our major equipment departments had work going on in the wood shop, at the same time on six projects. Want to help??:
Comments
Wed, 04-11-2018 11:28
You mention in the header that you would like to have the Electroliner operational by its birthday. Was it?
Sun, 04-08-2018 20:03
As a child, IRM was always my favorite place to visit. Well, other than grandma's house next to the Geneva Sub. It's been many years since I now [...]
Wed, 04-04-2018 16:01
Those temporary walls could be constructed in a way that allows their reuse after the phase is done to close off the new phases.
Tue, 03-27-2018 03:08
Why did the smoke box cover on the shay need to be replace Do?
Mon, 03-26-2018 16:29
It never ceases to amaze me of the diligence and passion of the current mix of volunteers associated with IRM in 2018. Back when I was a active [...]
Mon, 03-26-2018 11:10
Awesome paint job Jamie!!! I never would of thought with the Rock Island history this locomotive in this scheme would of been preserved. Thanks for [...]
Sun, 03-25-2018 23:56
The Hick's blog lists it as Fruit Grower's Express FGEX #55407. Arrived in Union June 2016.
Sun, 03-25-2018 20:51
Good job on the diesel update 2018. Sincere, Ethan A.
Sun, 03-25-2018 20:45
Good job on the steam update 2018. Sincere, Ethan A.
Sun, 03-25-2018 00:12
Bill, The 1990 Roster has the PFE #68428; this may be the reefer that we saw moved. It is a rare car and deserves a paint job. Ted Miles, [...]
Fri, 03-16-2018 11:10
It would be rather difficult to operate an 11,000 Volt AC locomotive on our 600 Volt DC wire.
Thu, 03-15-2018 05:57
Good job steam update. Sincerely, Ethan A.