Illinois Railway Museum Home Page
 BLOG | DIRECTIONS | SCHEDULE | STORE |
   

Illinois Railway Museum Blog

Entries from December 2013

Topics from December, 2013

1637 - Steam Department Update 12-28-13

Sunday, December 29. 2013. Posted by Nigel Bennett

1633 - Nevada Northern,"Ely", news update

Friday, December 27. 2013. Posted by Roger Kramer in Passenger Car Department

1634 - Steam Department Update 12-21-2013

Sunday, December 22. 2013. Posted by Nigel Bennett in Steam Department

1631 - Steam Department Update 12-14-2013

Sunday, December 15. 2013. Posted by Nigel Bennett in Steam Department

1628 - Wood Shop Update - December 7, 2013

Sunday, December 8. 2013. Posted by Robert Kutella

1627 - Steam Department Update 12-07-2013

Sunday, December 8. 2013. Posted by Nigel Bennett in Steam Department

1626 - Wood Shop Update - December 4, 2013

Thursday, December 5. 2013. Posted by Robert Kutella in Wood Shop

1624 - Wood Shop Update - November 30, 2013 TEST ENTRY

Monday, December 2. 2013. Posted by Robert Kutella in Wood Shop

1623 - Wood Shop Update - November 30, 2013

Monday, December 2. 2013. Posted by Robert Kutella in Wood Shop

1622 - Steam Department Update 11-30-2013

Sunday, December 1. 2013. Posted by Nigel Bennett in Steam Department

Blog Administration

Find us on Facebook

find us on instagram

Instagram

Category Tree

Calendar

Back December '13 Forward
Sun Mon Tue Wed Thu Fri Sat
4 6 7
10 11 13 14
16 17 18 19 20 21
24 25 26 28
30 31        

Quicksearch

Comments

c kronenwetter about Steam will likely run Memorial weekend
Fri, 05-27-2016 22:57
A job nicely done Nigel. Thanks to all of the steam team from we watchers out here in Internet land.


Ted Miles, IRM Member about Turntable successfully unloaded
Fri, 05-27-2016 15:56
Nigel, That is one big sukker of a turntable! i have pushed a narrow gauge table by hand; i do not think you can do that with the new one [...]


Bob Yarger about Turntable successfully unloaded
Fri, 05-27-2016 13:39
Can someone contact me via email concerning the smaller turntable, which, I'm told is 80 feet long? Thanks, Bob Yarger Wilton, NY


Roger Kramer about The Turntable Unloading Prep
Fri, 05-27-2016 07:32
Hello Ethan BTW the turntable was successfully unloaded yesterday! Mark Secco and his crew did a marvelous job planning and then executing this [...]


Ethan Armitage about The Turntable Unloading Prep
Thu, 05-26-2016 20:32
Hi Roger, Good job on the turntable turntable update. When will 1630 be running? Sincerely, Ethan A.


Raphael about Its Here, Its big, Its long, Its needs lots of $
Tue, 05-24-2016 13:10
the smaller one too?


Roger Kramer about Its Here, Its big, Its long, Its needs lots of $
Mon, 05-23-2016 19:52
Hi Raphael We will install the turntable. That is what we will do with it. Thanks Roger


Roger Kramer about Its Here, Its big, Its long, Its needs lots of $
Mon, 05-23-2016 19:51
Yes it will! Needs lots of money, energy and commitment ! Thanks Roger


Roger Kramer about EL coach 556 Will be in servce this year
Mon, 05-23-2016 19:49
Hello Kirk We are starting on the 2524 asap. The 2612 is all but finished. Still to be completed are projects that can not be accomplished by my [...]


Keegan about Its Here, Its big, Its long, Its needs lots of $
Mon, 05-23-2016 14:04
Did you say roundhouse to? That will really be impressive.


Kirk Warner about EL coach 556 Will be in servce this year
Mon, 05-23-2016 13:55
Are you going to finish the 2612 before you start on the 2524r are they both going to be worked on at the same time?


Kurt Schlieter about Its Here, Its big, Its long, Its needs lots of $
Mon, 05-23-2016 13:04
If you would like to see the turntable frame being moved, go to the IRM main page, click on "webcam information", on the next page click on "webcam [...]