Entries by Roger Kramer

This first week of June in barn 10 was very productive even with volunteers keeping the prescribed distancing. The four ongoing projects were the Mt Harvard, Milwaukee Road 649, John Mc Laughlin, and the Pawnee. The following is a summary of the four projects in pictorial form.

First, the Milwaukee Road coach, 649.

Steve is standing next to window frames that were freshly painted.

Our resident paint sprayer, Howard, is spraying more frames.

Later that day Steve is working in the interior of the 649.

For the last seven months the bulk of our restoration efforts in the coach department have been devoted to the John McLaughlin. I am proud to say that we have accomplished our goal of repainting the entire eight sections of the sleeper. Here are pictures of the last areas being repainted.

Not to be outdone, I painted the ceiling trim on the last day of May.

Work on the interior of the John McLaughlin, This is the last section to be painted.

Sandi is painting the brown wall color.

She was painting again the next day.

Here you realize there is much ladder work taken place on this entire project.

It takes many volunteer hours to restore the McLaughlin. Here Jane and John are reupholstering one of fifteen seat bottoms in the sleeper.

June 5th finds Tim removing paint from the last berth in the section area. The last one!

June 8th Sandi has already primed the last upper berth and now will begin painting the final coat.

The Pawnee has received a drumhead sign.

Here Jane, Robert and Logan are poising for the camera on the obs end.

Howard is working on restoring the shine on the car body.

Howard just finished buffing the exterior.  You can see his reflection.

The last project is the Mt Harvard.  I am committed to repainting the sleeper this year.  We are focusing all our attention on the exterior.  Getting it prepped is a labor intensive job.

Robert Kersey continues the body prepping by cleaning this area in preparation for priming.

One window in the mens bathroom.  We removed it in order for a repaint.

Here Robert is sanding more of the body. He is a new member to the coach department and is doing a fine job. Thanks, Robert, for your efforts.

Here is our VIP resident mechanic, Gregg Wolfersheim. Here he is repairing one of the two trap doors needed for the Mt. Harvard  vestibule. A little more about that later in another blog.

If you would like to see more progress in these four projects please consider make a donation to any or all of them.

Among the many restorations and building projects in 2019 was the painting of the steam locomotive T&NO #975, a 2-10-2 wheel arrangement. This project, which was started in 2018, was financed by the museum through the general fund. This is an example what can be done by the museum through the hiring of paid employees. A member, Gregg Wolfersheim, was hired to paint the engine and with his hard work he turned a rusty old steam engine into again a work of beauty.

Here the wheel frames are primed and prepared for a coat of black paint.

Here Gregg has removed the old rust and paint and is now applying a coat of Sherwin Williams  primer.

One brush stroke at a time.

The running gear on the west side is almost all primed with pink primer. We added a little too much red colorant into the primer. 

Here Gregg is spraying the front pilot area black.

1630 fired up. This could a rail yard in Texas! No, its at the Illinois Railway Museum.

Side view facing East.

Side view facing West.

Side view with smoke box painted.

More progress.

Here Gregg has painted the front of the smoke box gray.

West side where Gregg has prepped and painted most areas.

The tender has been painted and hand railings painted white.

975 almost finished. Lettering has yet to be completed!  

The headlight now is installed.

Now it looks like a steam loco. The Headlight sure makes a difference.

To preserve the 975 and its paint job we would like to house this engine in a new barn when built.  Please send donations to the T & NO 975 fund to help make this happen.  Thanks, Roger.

The Mt Harvard has changed its appearance since my last report on the sleeper. We have continued working on it through the winter and have made great strides on our goal of operating the Pullman. The change, has been amazing! I will explain as well as letting the pictures do the talking. You will remember we had our first xmas party in the Mt Harvard lounge last December. At that time party goers were impressed when shown our progress on the sleeper. We are making more progress concentrating now on the vestibule. Renewing and repairing that area is now our goal. Along with that is the prepping of both exterior sides for future painting.

Here is what the vestibule deck looked like in November 2018.

Another view of the project ahead of us.

Gregg has been restoring the vestibule deck floor. He has done this by removing the old rusted steel plate and then installing new painted steel sheets to support the deck.

He now has the new deck plate installed and painted black.

A more detailed view of the replacement steel welded in place.

This exterior sheet has also been replaced.

Gregg finished drilling holes and now a second coat of primer has been applied.

January, 2020 Gregg was busy fitting a new side panel into place.

He is checking his work.

North side of the vestibule.

The long awaited installation of the second stair. I am sure glad I had them manufactured eight months ago.

In April 2019 I contracted with Harmony Metal of Gilberts, Illinois to manufacture 6 duplicate stairs at a cost of $1200 ea.  One stair was installed in August, 2019 on the Mt Harvard. Now the second stair has been installed. An additional four stairs were made for the John McLoughlin's future installation.   

Just a reminder what the area looked like before we started this side of the restoration.

Here Sandi is trying to persuade the stair to get into proper alignment.

Using a comealong device, we moved the stair into position. Gregg drill holes from underneath and then fastened the last stair to the frame of the car.

Here is the finished product.  A couple of things must be added but now one can enter the sleeper from either side of the car.

The next job we worked on was installation of the two steam traps. These were removed in order to transport the Mt Harvard from the Mid Continent RR Museum to IRM.

The last project we started on before the shutdown was the rebuilding of the two traps for the vestibule. Parts have been made for the rebuild but we ran out of time to reassemble them.

Here Gregg is removing the brass support pieces for future installation.

We have also been working on the exterior. 

Here Bob Olsen of Waukegan, Illinois, is sanding one side of the car in preparation for future painting. 

Bill L. Davis, part of the father son team.

Darek Mitura pausing for the camera while  sanding a panel.

Bill R. Davis prepping the rivets.

I am so very proud of all the volunteers and employees that have contributed to this project! Many hours of work still lay ahead of us but we are all working together to get the job done. The Virus has complicated our time frame to return the Mt Harvard to limited service. Hopefully, we still might see the project get finished by the end of this year.

The Mt Harvard restoration is being solely funded by your donations to the restricted fund. Please consider a donation to help with the restoration of the Mt Harvard project! https://www.irm.org/donations/category/passenger-car-department/