Long awaited progress report on the Mt Harvard

The Mt Harvard has changed its appearance since my last report on the sleeper. We have continued working on it through the winter and have made great strides on our goal of operating the Pullman. The change, has been amazing! I will explain as well as letting the pictures do the talking. You will remember we had our first xmas party in the Mt Harvard lounge last December. At that time party goers were impressed when shown our progress on the sleeper. We are making more progress concentrating now on the vestibule. Renewing and repairing that area is now our goal. Along with that is the prepping of both exterior sides for future painting.

Here is what the vestibule deck looked like in November 2018.

Another view of the project ahead of us.

Gregg has been restoring the vestibule deck floor. He has done this by removing the old rusted steel plate and then installing new painted steel sheets to support the deck.

He now has the new deck plate installed and painted black.

A more detailed view of the replacement steel welded in place.

This exterior sheet has also been replaced.

Gregg finished drilling holes and now a second coat of primer has been applied.

January, 2020 Gregg was busy fitting a new side panel into place.

He is checking his work.

North side of the vestibule.

The long awaited installation of the second stair. I am sure glad I had them manufactured eight months ago.

In April 2019 I contracted with Harmony Metal of Gilberts, Illinois to manufacture 6 duplicate stairs at a cost of $1200 ea.  One stair was installed in August, 2019 on the Mt Harvard. Now the second stair has been installed. An additional four stairs were made for the John McLoughlin's future installation.   

Just a reminder what the area looked like before we started this side of the restoration.

Here Sandi is trying to persuade the stair to get into proper alignment.

Using a comealong device, we moved the stair into position. Gregg drill holes from underneath and then fastened the last stair to the frame of the car.

Here is the finished product.  A couple of things must be added but now one can enter the sleeper from either side of the car.

The next job we worked on was installation of the two steam traps. These were removed in order to transport the Mt Harvard from the Mid Continent RR Museum to IRM.

The last project we started on before the shutdown was the rebuilding of the two traps for the vestibule. Parts have been made for the rebuild but we ran out of time to reassemble them.

Here Gregg is removing the brass support pieces for future installation.

We have also been working on the exterior. 

Here Bob Olsen of Waukegan, Illinois, is sanding one side of the car in preparation for future painting. 

Bill L. Davis, part of the father son team.

Darek Mitura pausing for the camera while  sanding a panel.

Bill R. Davis prepping the rivets.

I am so very proud of all the volunteers and employees that have contributed to this project! Many hours of work still lay ahead of us but we are all working together to get the job done. The Virus has complicated our time frame to return the Mt Harvard to limited service. Hopefully, we still might see the project get finished by the end of this year.

The Mt Harvard restoration is being solely funded by your donations to the restricted fund. Please consider a donation to help with the restoration of the Mt Harvard project! https://www.irm.org/donations/category/passenger-car-department/