|
|
Sunday, October 27. 2013The Montrose Bridge - October 23, 2013There used to be a bridge to carry the CNS&M tracks from the elevated structure about Wilson Ave on the North South line, then south over Montrose Ave. and down a ramp to the ground level North Shore facility about Buena. Some years ago the Museum was fortunate to acquire the three spans and two of the support steel 'piers'. The two steel supports were re-purposed to support the new Central Pavillion area and are restored to hold the roof and on display. For many years the three steel spans have resided just south of our car line tracks and east of the Springfield Ave platform. On October 23 cranes were on site and the three spans were moved. First, the short span was taken south to be adjacent and north of Yard 13.  The Lift Next the cranes lifted the easternmost of the long spans.  Walking With a crane on each end, the span was 'walked' east toward South Junction.  New Location The span continued to moved, first turning south, and then traveling along the leads to Yard 13. Ultimately it was paced just to the north of the area where the leads go due west. And then the second long span was stacked atop the first one. Wednesday, October 23. 2013RI 2612 the resumption of restoration
With the Thomas event and the wonderful 4-day Railfan weekend now behind us work began again in earnest. We began by disassembling and then sandblasting spare rusty RI seat frames that we found in our storage field. These will be installed in the middle of the car where the original six were removed to make room for the "bar." Gary Sherman has made it his responsibility to remove any old bolts and to sandblast the rusty steel parts. Jan, Jane, and Loraine began priming them after they were sandblasted. Having the sandblaster operational is a very big plus. Then they will be topcoated and reassembled. Future blogs will show the results of our efforts.
 Jan Hervert standing next to some of the seat parts he had just painted.  Jan and Loraine with more painted seat parts  Brian and Kyle repairing a seat pedestal. Yes, repairs can be done too.  Loraine painting the replacement assembled seat frame  Jane and Loraine painting frame parts . What a wonderful outdoor activity Tuesday, October 22. 2013Summarizing Some September Activities for the Passenger Car DepartmentThe ongoing never ending process of peeling decals off of the second Exhibit Car continued in September with the nimble fingers (numb?) of Shelly Vanderschaegen, Jon Habegger, John McKelvey, Wayne Baksic and Pauline Trabert.
About the middle of the month, Department Head Michael Baksic lead his crew in preparing the streamliner cars for the Terror on the Railroad Haunted Event. Which means taking down fans, air conditioners, TV's, flyers, window shades, stripping beds, and putting the upper berths up that weren't going to be used by dead bodies. Temporary plastic between two of the cars was removed so the cars could be moved. Mark Gellman, Ray Mormann, and Mike Baksic got the generators up and running.
Additionally, Mike and Ray put up a panel outside the vestibule on the first Exhibit Car.
|
Blog AdministrationCalendar
QuicksearchSyndicate This Blog |
|||||||||||||||||||||||||||||||||||||||||||||||||
Comments
Mon, 09-08-2025 08:22
Good job on the Burlington Nortern 9976. OK.
Tue, 08-12-2025 12:56
No new news that I have heard of thus far.
Tue, 08-12-2025 12:53
I'll also be doing another update on it soon. Keep en eye out for that.
Tue, 08-12-2025 12:47
A little work was done to it for Diesel Days this year. You'll see photos floating around for the temporary short term job that was done to make it [...]
Wed, 08-06-2025 13:01
Is steam car CN 15444 going to be coming to museum several times it was to be moved to muesum
Sat, 07-19-2025 18:56
Yeah, sadly it's still there as of 7/19/2025
Thu, 06-12-2025 19:14
Its been 14 years guys, where is the unit? Like really? Did you guys misplace it? Or are repairs taking that long? At this point be might we will have [...]
Wed, 04-09-2025 17:40
Jamie Thanks for the update. She's gonna shine like every thing else you guys do! Smeds
Thu, 03-06-2025 16:28
Yes, there is a wye. Those two have been MU'ed on diesel days a year or two ago.
Wed, 03-05-2025 14:04
7009 number boards look good. Is there a way to turn a locomotive around at IRM? In case you ever had a mind to connect 7009 and 6847?
Fri, 03-29-2024 21:26
We're slackers and spend more time working on the equipment in the shop than keeping all you readers updated. We'll work on it, but I'm sure updates [...]
Thu, 03-14-2024 08:02
What happened to the Department Blog? It's been over 2 years and I still regularly check for updates, but nothing comes...