|
|
Thursday, November 10. 2011TMS Project - November 9, 2011As reported earlier, the second motor truck was removed from the car last Sunday. But the Electric Car Department does not rest on their laurels. A crew was set up to completely disassemble the truck to get the wheelsets out on Tuesday!  Wheelsets Yes, this is the second set removed, ready to be shipped to the wheel shop!  Motors Here are the two traction motors removed from truck number two. It has probably been over a half century since this truck was out from under the car floor, when it was still in Milwaukee. And it looks it! Lots of grime, crud, and dirt in evidence. Frank Sirinek has already begun the task of cleaning one piece at a time and he was helped by Victor Humphreys, readying them to be primed and painted. BLOG readers should be sure to follow comments on these pages. Especially noteworthy is one from Tom Sharratt who is very active in this work, and he notes MATCH MONEY is still available to turn your donations from one dollar to two, for every contribution sent. Thursday, November 10. 2011GN 70104 Update - November 9, 2011The weather turned nasty this week, but we did get some lettering done before the bottom fell out of the thermometer in the afternoon. This is one of the groups, a lot of letters to be drawn and cut out with two days of 'homework' earlier this week for me.  B End This almost completes the lettering needed on the end sheet for this end of the car. We did some more on the left side, but tight quarters and poor light resulted in no images. Thursday, November 10. 2011CTS 4223 Update - November 9, 2011 Windows With the first snowflakes falling outside the shop window, Rich Witt has come up with a time saving idea and he is trying it out on the first sash of the day. IT WORKS!! Behind him, John Nelligan works to restore an electrical switch for the locomotive, Charles City Western 300.  Production Line In short order, a production line was set up and many of the sash were successfully cleaned up for this car. Nancy Ring, Simon Harrison, Lorne Tweed, and Rich Witt turn to the task.  In the Car Out in the barn, several folks chipped in for the heavy lifting. A lot of the stored parts inside were moved and organized, and new sheets of plywood installed on the floor for a safer work environment. Here, Simon Harrison and Lorne Tweed work to be ready to lift and install the first clamshell (rear ceiling headlining) to the ceiling. |
Blog AdministrationCalendarQuicksearchSyndicate This Blog |
Comments
Fri, 03-29-2024 21:26
We're slackers and spend more time working on the equipment in the shop than keeping all you readers updated. We'll work on it, but I'm sure updates [...]
Thu, 03-14-2024 08:02
What happened to the Department Blog? It's been over 2 years and I still regularly check for updates, but nothing comes...
Mon, 12-27-2021 16:28
Happy New Year to all the Departments at the Illinois railway Museum! Thanks for all the good work you do in railroad preservation. Ted Miles, [...]
Wed, 10-13-2021 13:33
Was the CB&Q 1309 every transported to IRM?I’ve been reading old issues of Rail&Wire and the car was mentioned several times.
Mon, 06-07-2021 22:40
I was wondering if in the model layout display what scale would you guys be using and would you be displaying model train history as well? Just [...]
Wed, 06-02-2021 17:27
Nice to see 428's cab back on. Looking forward to when it is operable!
Tue, 06-01-2021 16:47
I hope the work will continue on the UP #428. Now that they are the museum's connection to the national railroad network; she would be very [...]
Sat, 04-17-2021 23:07
What is the status of 126, the Milwaukee Buffet car that is in S. Dakota? Any guess on when or if it will get to IRM?
Wed, 04-14-2021 21:09
Perhaps it is time to scrap the remains of the c, B & Q 7128 to make room for the Villa Real. Ted miles, IRM member
Wed, 04-14-2021 15:26
Hi IRM my name is Jason and I was wonder If you guys would be willing to save a CN Dash8-40cm they are currently being retired by CN and being [...]
Fri, 04-09-2021 19:56
Bear in mind that the Nebraska Zephyr is an articulated train set, so cars cannot be inserted at will. Although cars and/or a second engine could be [...]
Wed, 03-31-2021 11:37
I believe Silver Pony is currently on the back burner, and has been put into storage in one of the barns. The car needs a lot of work done to it's [...]