|
|
Monday, July 23. 2012CGW X 38 Update - July 21, 2012Work continues on the snow plow restoration, lately working to replace wood framing and timbers inside the car body. This allows some relief from the withering heat, as the woodworking is done inside the shop.  Lintel John Faulhaber is working on the table saw with our sled jig to hog out material and result in new tenons on each end of this timber. It is a lintel, for the right hand doorway on the plow, the horizontal piece that helps frame the opening.  Door Frame With the lintel done, Buzz Morisette, John, and myself did a dry fit of all the parts on the workbench. This is an assembly that has to be put together first before installing in the car. Of course it fit perfectly (after two or three trips back and forth to trim up shoulders, etc). Henry Vincent helped start the boring process for the ten holes to mount it. |
Blog AdministrationCalendarQuicksearchSyndicate This Blog |
Comments
Fri, 03-29-2024 21:26
We're slackers and spend more time working on the equipment in the shop than keeping all you readers updated. We'll work on it, but I'm sure updates [...]
Thu, 03-14-2024 08:02
What happened to the Department Blog? It's been over 2 years and I still regularly check for updates, but nothing comes...
Mon, 12-27-2021 16:28
Happy New Year to all the Departments at the Illinois railway Museum! Thanks for all the good work you do in railroad preservation. Ted Miles, [...]
Wed, 10-13-2021 13:33
Was the CB&Q 1309 every transported to IRM?I’ve been reading old issues of Rail&Wire and the car was mentioned several times.
Mon, 06-07-2021 22:40
I was wondering if in the model layout display what scale would you guys be using and would you be displaying model train history as well? Just [...]
Wed, 06-02-2021 17:27
Nice to see 428's cab back on. Looking forward to when it is operable!
Tue, 06-01-2021 16:47
I hope the work will continue on the UP #428. Now that they are the museum's connection to the national railroad network; she would be very [...]
Sat, 04-17-2021 23:07
What is the status of 126, the Milwaukee Buffet car that is in S. Dakota? Any guess on when or if it will get to IRM?
Wed, 04-14-2021 21:09
Perhaps it is time to scrap the remains of the c, B & Q 7128 to make room for the Villa Real. Ted miles, IRM member
Wed, 04-14-2021 15:26
Hi IRM my name is Jason and I was wonder If you guys would be willing to save a CN Dash8-40cm they are currently being retired by CN and being [...]
Fri, 04-09-2021 19:56
Bear in mind that the Nebraska Zephyr is an articulated train set, so cars cannot be inserted at will. Although cars and/or a second engine could be [...]
Wed, 03-31-2021 11:37
I believe Silver Pony is currently on the back burner, and has been put into storage in one of the barns. The car needs a lot of work done to it's [...]