The old TV commercial seemed to say "Parts is Parts", at least for a chicken. Not so true for restoration work. Bill Peterson is cleaning up many of the cupola window hardware parts. Earlier he had completed the fitting and installation of the floor repair pieces inside the rear compartment, left side.
Victor Humphreys is installing a very old mortise lock for one of the doors on the snowplow. Lots of drilling, fitting, chiseling.
Buzz Morisette continues the tricky work of restoring the window framing and sills in the cupola. Here he adding some paint to the framing for the left rear window.
First thing in the morning Victor Humphreys went up on the roof and finished the second coat of new paint on the cupola roof, before the metal work got too hot in the sun. Uncertain weather drew out this task, but we are off and running now.
We also applied the first maroon to be seen on the cupola. This to the posts, trim, and framing exterior, while Buzz applies some finish grey to the new wood sills and posts on the left side.
Comments
Mon, 09-08-2025 08:22
Good job on the Burlington Nortern 9976. OK.
Tue, 08-12-2025 12:56
No new news that I have heard of thus far.
Tue, 08-12-2025 12:53
I'll also be doing another update on it soon. Keep en eye out for that.
Tue, 08-12-2025 12:47
A little work was done to it for Diesel Days this year. You'll see photos floating around for the temporary short term job that was done to make it [...]
Wed, 08-06-2025 13:01
Is steam car CN 15444 going to be coming to museum several times it was to be moved to muesum
Sat, 07-19-2025 18:56
Yeah, sadly it's still there as of 7/19/2025
Thu, 06-12-2025 19:14
Its been 14 years guys, where is the unit? Like really? Did you guys misplace it? Or are repairs taking that long? At this point be might we will have [...]
Wed, 04-09-2025 17:40
Jamie Thanks for the update. She's gonna shine like every thing else you guys do! Smeds
Thu, 03-06-2025 16:28
Yes, there is a wye. Those two have been MU'ed on diesel days a year or two ago.
Wed, 03-05-2025 14:04
7009 number boards look good. Is there a way to turn a locomotive around at IRM? In case you ever had a mind to connect 7009 and 6847?
Fri, 03-29-2024 21:26
We're slackers and spend more time working on the equipment in the shop than keeping all you readers updated. We'll work on it, but I'm sure updates [...]
Thu, 03-14-2024 08:02
What happened to the Department Blog? It's been over 2 years and I still regularly check for updates, but nothing comes...