Today's track report starts with a trip to the Aurora Transportation Center to pick up Marcus. Marcus has not been out for quite some time, and was suffering IRM Withdrawl, so I agreed to pick him up at the ATC and bring him up.
Proper track work requires proper sustenance, so the next stop was the Marengo cafe for breakfast. After breakfast we ran to Napa for a case of antifreeze for the model 50 burro. Later we would realize the value of this stop for another purpose... more on that later.
Next stop was a conference with Julie on budgetary and trackwork for 2011. This conference turned into a long discussion that got slightly off topic but was fun even if not totally productive. When this conference finished, it was time for lunch. Yea.. long conference.
Upon return from lunch, we got the 50 fired up and yes, the tranny was frozen up again. Attempts to thaw her out failed, so we left her running and went to work on something else. Almost on cue, Julie called and advised the
block heater that Adam had ordered for the tie crane had arrived. Plan B was hatched. Marcus and I got the old heater off, and quickly realized we would have to re-use the mount since it had a hose mount off of it that was absent from the new mount.. not a big thing. As we were working on this task we were joined by David Fullarton. He helped us finish off the filling of the radiator since we had a full case of new anti freeze from earlier in the day.
So we return to our idling 50 and find the tranny is finally ready to work. We put Marcus in the crane, swing over and pick up the scrap gon, and go mag some diamond parts. About half way through the pick up, we put David in the hot seat and had him work the magnet. I hung off the side of the cabin, for the first few pics talking him through the steps. David picked up running the crane fairly quick, so I got back on the ground to help with the picks since some of the derbis was frozen. After about a half hour we had the pile picked up. The last pick a big chunk did not want to fall off the magnet. So we talked David through scraping the mag across the top of the car to knock it off. After that David ran the crane back to the crane's home and put her away.
Last thing of the day was to check on the block heater of the tie crane. We confirmed we had heat from the new block heater, and attempted a start. No joy, still too cold. I'm guessing with a little more time on the block heater, and a little time on a battery charger, she will fire right up.
We cleaned up for the day, then Marcus and I made a run to the Roundhouse in Aurora for dinner, before Marcus caught a train back to the city.
Photos of the days activities are here:
http://www.irm.org/gallery/album266 Frank D.
I want to thank those who have taken the time to send reports and photos during the period I am laid up. Here are some views from the camera of Tim Peters.
Tim Peters, with help from Buzz Morisette, is ripping new poplar planks for new tack molding for our CTA 4000 cars. Earlier this week he ran test pieces through our FAY molder so now is the time to prepare all the stock for the 'production' run.
This piece is leaving the saw. I thought we were supposed to be having fun, working at IRM. From Tim's expression, I hope this was not too painful!!
Randall Hicks finished making a set of new saddles for the Chicago Aurora & Elgin 319, and Brother Chris Buck was drafted to start the priming and painting phase.
Comments
Fri, 03-29-2024 21:26
We're slackers and spend more time working on the equipment in the shop than keeping all you readers updated. We'll work on it, but I'm sure updates [...]
Thu, 03-14-2024 08:02
What happened to the Department Blog? It's been over 2 years and I still regularly check for updates, but nothing comes...
Mon, 12-27-2021 16:28
Happy New Year to all the Departments at the Illinois railway Museum! Thanks for all the good work you do in railroad preservation. Ted Miles, [...]
Wed, 10-13-2021 13:33
Was the CB&Q 1309 every transported to IRM?I’ve been reading old issues of Rail&Wire and the car was mentioned several times.
Mon, 06-07-2021 22:40
I was wondering if in the model layout display what scale would you guys be using and would you be displaying model train history as well? Just [...]
Wed, 06-02-2021 17:27
Nice to see 428's cab back on. Looking forward to when it is operable!
Tue, 06-01-2021 16:47
I hope the work will continue on the UP #428. Now that they are the museum's connection to the national railroad network; she would be very [...]
Sat, 04-17-2021 23:07
What is the status of 126, the Milwaukee Buffet car that is in S. Dakota? Any guess on when or if it will get to IRM?
Wed, 04-14-2021 21:09
Perhaps it is time to scrap the remains of the c, B & Q 7128 to make room for the Villa Real. Ted miles, IRM member
Wed, 04-14-2021 15:26
Hi IRM my name is Jason and I was wonder If you guys would be willing to save a CN Dash8-40cm they are currently being retired by CN and being [...]
Fri, 04-09-2021 19:56
Bear in mind that the Nebraska Zephyr is an articulated train set, so cars cannot be inserted at will. Although cars and/or a second engine could be [...]
Wed, 03-31-2021 11:37
I believe Silver Pony is currently on the back burner, and has been put into storage in one of the barns. The car needs a lot of work done to it's [...]