|
|
Thursday, August 27. 2009URTX 26640 Update August 26, 2009 Cleaning the B end Needlechipping is proceeding on the B end. Not devasting hard labor but the noise and vibration get to you. And many coats of paint or cement on these ends make for slow work  1/3 done Despite intermittent showers, about 1/3 of the end is clean and primed. Ladder work next.  Upper Door Track The upper door track on the right side has been re-installed. Later in the day milling and checking of the remaining wood siding continued, pieces fit and primed. Thursday, August 27. 2009Wood Shop Update August 26, 2009 Tenoner Here is a pic from Kirk Warner of me in the cage and Jim Griffith working on the HB Smith tenoner we obtained last fall. Trolley fans will remember this in use at the Illinois Terminal main shops at Decatur about 1910. A lot of work in the meantime, and late yesterday we were able to run the motor and machine for very short periods, proceeding to fine tune or fix each problem as they were discovered. Thursday, August 27. 2009Chicago Surface Lines 3142 Progress August 26, 2009 Shrink Wrapped? No, not a prime rib from the meat department, although a bit more expensive. Recall the news that a motor failed on our workhorse 3142 in mid summer. The offending motor has been to the motor shop and repaired/rebuilt and was delivered yesterday. Just pulling a motor from a car without the use of an overhead crane shows how resourceful our volunteers are. Now to reverse the process and test it out. Yes, donations are needed. |
Blog AdministrationCalendarQuicksearchSyndicate This Blog |
Comments
Mon, 09-08-2025 08:22
Good job on the Burlington Nortern 9976. OK.
Tue, 08-12-2025 12:56
No new news that I have heard of thus far.
Tue, 08-12-2025 12:53
I'll also be doing another update on it soon. Keep en eye out for that.
Tue, 08-12-2025 12:47
A little work was done to it for Diesel Days this year. You'll see photos floating around for the temporary short term job that was done to make it [...]
Wed, 08-06-2025 13:01
Is steam car CN 15444 going to be coming to museum several times it was to be moved to muesum
Sat, 07-19-2025 18:56
Yeah, sadly it's still there as of 7/19/2025
Thu, 06-12-2025 19:14
Its been 14 years guys, where is the unit? Like really? Did you guys misplace it? Or are repairs taking that long? At this point be might we will have [...]
Wed, 04-09-2025 17:40
Jamie Thanks for the update. She's gonna shine like every thing else you guys do! Smeds
Thu, 03-06-2025 16:28
Yes, there is a wye. Those two have been MU'ed on diesel days a year or two ago.
Wed, 03-05-2025 14:04
7009 number boards look good. Is there a way to turn a locomotive around at IRM? In case you ever had a mind to connect 7009 and 6847?
Fri, 03-29-2024 21:26
We're slackers and spend more time working on the equipment in the shop than keeping all you readers updated. We'll work on it, but I'm sure updates [...]
Thu, 03-14-2024 08:02
What happened to the Department Blog? It's been over 2 years and I still regularly check for updates, but nothing comes...